20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser

20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser

20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser
20KPPS 30KPPS Laser Scanning Galvanometer For Light Show Stage Lighting Laser DJ. 20KPPS Laser Scanning Galvo Scanner ILDA Closed Loop Max 30kpps for laser Light Show. IS Input scale (adjusted only in factory) - SG Servo gain power of the feedback signal for internal PID controller - LFD Low frequency damping (correct overshoot) - HFD High frequency damping (correct undershoot) - LIN Zero offset (electrical offset of the driver, adjusted only in factory) - PS Position scale (increases or decrease input sensitivity of the computer, DO NOT change it). Closed Loop Moving Magnet Scanner - Input resistance: 200K ohms, differential - Signal Input voltage:±5V - Input voltage requirements: +15V/1.0A, -15V/0.6A - Operating temperature range:050 degrees C - Optical angle:±30° max - Scanner speed:>15Kpps (30K ILDA test-pattern , ±20°optical) - Mirror dimensions WxL: 7mm11mm0.6mm (wide wave-length) - Board size:7.4cm (long) 5.0cm (wide) 2.5cm (high). 2×Scanners - 1x main board (show card) - 2×Driver board - 2×Mirrors - 1×Scanner mount - 1×power supply (PUS) - 2×Cables driver to scanner - 2×Cables driver to PUS - 2×Cables driver to input signals - 2x DB25 connector - 1x microphone connector - 1x dipswitch. Pls leave a note or send a message if any question. Working Time We work from Monday to Friday. We'll reply message within 24 hours during working time and 48 hours during vacation. We'll do best to solve problem, don't worry. The item "20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser" is in sale since Thursday, September 19, 2019. This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting\ Single Units". The seller is "aprilpark777" and is located in Shenzhen. This item can be shipped worldwide.
20KPPS 30KPPS Galvo Scanner Galvanometer For Light Show Stage Lighting Laser