We just do quality goods! 1pcs 5w RGB LASER LIGHT carton pack.
1 x laser projector light. PLUG FOLLOW CUSTOMER COUNTRY DO:LIKE US/EU/AU.... ILDA DMX RGB Full Color Laser Light Projector for Stage Show Disco Lighting.RED:638nm 450mw ;GREEN:520nm 1000mw ;BLUE:450nm 3000mw. Guaranteed power at aperture:5300mw. Beam spec(full angle):ca. Functions:ILDA, DMX, SOUND, AUTO, MASTER/SLAVE. Power supply:100V - 240 V / AC, 50/60 Hz. Dimension:23(L)17(w)14(H) cm, NW:6.5KG. FEATURE:Sealed design, dust-proof, no maintenance needed, small size, small beam, analog modulation up to 100K. Interface:DMX IN&OUT, MIC, SOUND, ZOOM-X, ZOOM-Y, LED Digital tube, ILDA IN&OUT, KEY, FUSE, POWERCON IN&OUT, INTERLOCK, SWITCH. Connect the power cable to the device and to the mains.
Make sure that your device is provided with the correct voltage. ILDA in / ILDA out.The device can be controlled via ILDA control signal. There are an ILDA-in (ILDA input) and an ILDA-out interface. If the fuse should blow, please change it by a new one. If the problems recurs, please contact Magnum lighting service department. Please plug the key to the switch and turn it on. The laser device only runs when the key is inserted and switched on. Unplug the key when the laser is unattended to prevent misuse of the system. Set the microphone sensitivity by the SOUND knob. This setting is needed when music mode is active. Use the Zoom-X / Zoom-Y knobs to change the pattern size on the X.
The modes can be selected by the MODE button below the LCD display. Use the UP or DOWN buttons to set the DMX address and press DIR to select the requested mode or conrm the DMX address (see below). Select this mode by pressing the MODE button until Auto is displayed and conrm by pressing DIR.
Now the laser device projects patterns in random order. Select this mode by pressing the MODE button until Aud1 is displayed and conrm by pressing DIR. Control the sensitivity of the microphone by the SOUND trim pot at the rear side of the device.
The LED is ashing when the device is triggered. Change the DMX address by using the UP and/or DOWN buttons and conrm the DMX address by pressing the DIR button.
By pressing the UP or DOWN buttons for 3 seconds, the DMX values increases / decreases in intervals of +/- 10. We recommend to connect a DMX controller to. The laser uses 12 DMX channels. Connect your device (ILDA IN) via an ILDA cable to an interface / controller.To use the daisy chain / Master-Slave-Mode connect two (or more) laser projectors of the same series via DMX cables. Select this mode by pressing the MODE button until the display shows Auto and conrm by pressing DIR. Now the laser device projects animations in random order.
To turn off the device switch it off (OFF), turn the key OFF and disconnect the power cable from the mains. , also will effect by many factors, such as holidays, weather conditions etc, so it will probably take longer time for your items to arrive at the final destination. Thank you for your understanding on this matter. We are professional stage light.
We specializing in manufacturing Led stage lights:moving head+par can+wall washer+laser light+effect light and so on... Our lights have been installed in various domestic and international stage, use in Guesthouse, Hotels and other public and private places, etc. And exported to Europe and America more than 80 countries and regions.
Details pls visit our hqlite web or facebook. All lights passed CE/ROHS certifications. Treat every customer by heart!
Thanks for your time and cooperation. Us before leaving negative and neutral feedback. Best to solve the issue. Your satisfaction is our first priority. When you receive the package , please open the package and check all items before you sign.If the item are broken , please. Y company to make:damage certificate. (this must be done within 48hours after u received lights). We are real manufacturers , quality assurance, affordable, if you need any more, please contactus for Negotiate. PE bag with Kraft carton. For normal pack; special as flight case pack.
We control the quality by. The workers will check them one by one again when they finish them, after the workers finish produce.After 24 hours testing, our QC will check them all again before they be packed. The package worker will check them again to make sure everything is ok. If there is the problem with the product, firstly you need send the picture or the video to us, we will check whats the problem , if the problem can use the part to solve , we will offer you the replacement for free. Thanks for your time, have a happy shopping! The item "5W RGB animation laser light 12 channel ILDA sound AUTO stage light full color" is in sale since Saturday, July 27, 2019. This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting\ Single Units". The seller is "hqlite99" and is located in , . This item can be shipped worldwide.